Gloss-it's 16oz One Step Machine Gloss

One Step Correction

ONE STEP MACHINE GLOSS

Gloss-it's One Step Machine Gloss corrects up to 70% of paint imperfections - the new bar for all one step polishes. The chemistry behind our new polish was designed with a unique blend of our three different paint correction polishes and our final LSP finish. Gloss-it's One Step Machine Gloss will repair, restore, and protect in one step and leave a mirror like shine without leaving swirl marks or scratches. One Step Machine Gloss is safe for all conventional clear coats, single stage paint, and Nano Ceramic clear-coats. One Step Machine Gloss can be used by hand or by machine for best results. Use our Gloss-it Dual Head Orbital Polisher with Yellow and Orange foam pads for heavy paint correction and Green and Blue foam pads for light defects. Please visit Gloss-it.com for online instructional videos.

INSTRUCTIONS
1. Wash and clean vehicle paint finish with Gloss Car Wash Shampoo before applying One Step Machine Gloss.
2. Check paint finish for any remaining contamination (tar, metal particles, or fallout). If contamination is found use our Gloss-it clay bar with Gloss Enhancer before applying One Step Machine Gloss. Best results are achieved with Gloss-it Evolution Polish and Gloss Activator before applying One Step Machine Gloss.
3. Shake well before applying One Step Machine Gloss on a cool and cured surface. Apply in shaded area and if possible avoid direct sunlight.
4. Cyclo or 7424XP Porter Cable Polisher Application:
Apply bead size amount on each foam pad. Be sure to rub product into pads to help prevent slinging. Spread polish over the panel evenly with buffer turned off. When using polisher, start on top panels first then proceed to lower panels. Work orbital polisher in small 2' x 2' sections. Apply 10 to 15 pounds of pressure then ease up pressure as imperfections are being removed. Use criss-cross pattern overlapping from vertical to horizontal direction. Buff until product is no longer visible and defects are removed. To produce a hologram-free finish spray a mist of Gloss Enhancer during final moments of One Step Machine Gloss application. Using our exclusive EVO Backing Plate and Foam Polishing Pads greatly increases gloss and easy of product application.
Side Note: For recommended speeds for Porter Cable polisher please download our polishing guide from Gloss-it.com or glossitonline.com.
5. Use Gloss-it ultra plush micro fiber towel and Gloss Enhancer to remove any additional residue before applying Concorso or Gloss Finish LSPs.
Pro Tip: Use a single drop/fine mist spray of EVP Pad Prime and/or Gloss Enhancer per body panel allowing the polish to diminish completely for true paint correction results. This technique produces unrivaled depth, clarity, and color enhancement.

CAUTION: Keep out of reach of children. Do not take internally.

Gloss-it Suggests:

Gloss-it's EVO 5.75" Orange Heavy Cut Foam Pad Add Price: $19.95 Gloss-it's 22oz Gloss Enhancer Add Price: $19.95 Gloss-it's 8oz Gloss Finish Add Price: $29.95 Gloss-it 3" and 5" Evo Rotary Backing Plate Duo Add Price: $66.90